APEX INDUSTRIAL AUTOMATION LLC
Apex Industrial Automation is a distributor for Simatec Smart Technologies Sold millions of times and suitable for any single-point lubricating task with grease or oil. The automatic lubricator simalube offers five different sizes. All possible kinds of lubricating points with lubricant. 24 hours, day in, day out.
The automatic lubrication can easily be installed everywhere, in any position and 360 degrees around its own axis. When properly installed and operating, the LED indicator on the simalube® IMPULSE flashes green at regular intervals. Red flashes signal overpressure, inactive and empty conditions.
Automatic Lubrication Installation
Save Money and Improve Safety in Lubrication
Using Simalube pays off in many ways. Manual lubrication is no longer required. As a result of the time saving alone, costs are considerably reduced and manpower resources are freed up for profitable tasks in the value chain. With manual lubrication, bearings are usually over- or under-lubricated, which causes them to overheat or dry up, resulting in mechanical failure and unplanned downtime.
Greater Operational Safety
Lubrication points are often located in places that are difficult and dangerous to access. Simalube helps reduce the number of maintenance and inspection rounds required. The automatic dispenser makes it easier to comply with occupational safety standards, which in turn results in significantly fewer occupational accidents.
The lubricators are tested according to the latest standards of product safety. They are approved for use in all areas with potentially explosive atmospheres, with gases, dusts and even in mining. Approval certificates can be requested from the manufacturer.
The dispenser can be used easily in all industry sectors. Water treatment plants, the automobile industry, chemical plants, foodstuffs manufacturers and underground mines; even hospitals and clinics trust in the Swiss lubricator.
How the Technology Works
Simalube automatically lubricates for periods from one month up to a year. The required time period can be adjusted on the dispenser. It is driven by the globally patented gas producing dry cell. The gas generated by the cell builds up the excess pressure in the dispenser behind a piston, and this automatically and evenly pushes the lubricant into the lubrication point.
The grease and oil dispenser is screwed in directly at the lubrication point instead of the grease nipple. The practical parts in the manufacturer’s accessories range ensure that the automatic lubrication can easily be installed everywhere, in any position and 360 degrees around its own axis.
Environmentally Friendly Disposal
When the lubricator is empty, it can easily be refilled or disposed of in an environmentally friendly way. This is possible because the dispenser does not contain any toxic liquids such as acids, and all parts can be recycled. The gas producing dry cell is disposed of like an ordinary battery, and the empty dispenser case is disposed of in the same way as normal waste.
The Simalube comes in five different sizes (15ml, 30ml, 60ml, 125ml and 250ml), with over ten tried and tested standard lubricants. This ensures far greater flexibility of use.
The manufacturer also provides empty dispensers for customers to fill with their own grease or oil. This is a major benefit for users who can thus use their own tried and tested lubricants. Accessories developed are used for many different and complex applications of Simalube lubricators.
- General application
- Food industry
- Paper and cardboard industry
- Mining industry
- Textile industry
- Wood industry
- Wind power plants
- Hospitals and clinics
- Graphic industry
- Automotive industry
- Plastics industry
- Chemical plants
- Sewage treatment plants
- Cable cars and mountain railways
- Building industry
- Automation industry
- Cement industry
- Ship industry
- Beverage Industry
- Recycling Industry